AmeriGlas
Crafts |
|
.
Return
to top of page
|
 |
Power Tool Foot Switch
Keep your hands free for work by using
a convenient foot switch with your glass grinder or glass saw.
The grounded foot switch is designed for use with any power
up to 5 AMP. Most grinders, glass saws and came saws draw
only 1 to 2 AMPS.
TL-318 Power Tool Foot
Switch ......................................... 37.95
|
|
|
.
Return
to top of page
|
|
|
Safety Glasses
A Must for Eye Protection
Heavy-duty plastic glasses have clear
lenses with side shields for added safety and eye protection.
Safety glasses are light weight and can be worn over prescription
glasses.
TL-905 Safety Glasses ................................
each 2.95 / 6+ 2.49
|
|
|
.
Return
to top of page
|
|
|
Grinder & Bandsaw
Coolant
Grinder coolant added to the water
reservoir of your grinder adds life to your diamond grinding
heads and your diamond bandsaw blades. Coolant also reduces
heat that causes fractures while grinding or cutting. Coolant
mixes in a 30:1 ratio with water to produce two gallons from
8 oz bottle.
SP-904 Grinder & Bandsaw
Coolant ..................................... 9.95
|
|
|
.
Return
to top of page
|
|
Standard
Face Shield
Magna
Shield
|
Grinder Face Shield
Transparent 11" x 8-1/2"
plastic shield is larger than most face shields. Attaches
easily to Inland grinders and also works for most other grinders.
Face shield is available as standard or MagnaShield, which magnifies
the work area.
TL-315 Grinder Face Shield
.............................................. 16.95
Sorry
- Out-Of-Stock No Backorders
TL-383 MagnaShield Face
Shield ...................................... 17.95
Sorry
- Out-Of-Stock No Backorders
|
|
|
.
Return
to top of page
|
|
|
Grinder Splash Guard
Shield fits around grinder to protect
work area from spray. Heavy plastic covered board is hinged
to allow easy placement and cleans up easily. The splash
guard is designed to fit any grinder.
TL-319 Grinder Splash Guard
............................................ 19.95
|
|
|
.
Return to top
of page
|
|
1/4"
Head
3/4" Head
1" Head
|
Inland Diamond Grinder
Heads
Diamond grinder heads fit all Inland
grinders and can be used as replacements on Glastar (except Starlet/G5),
Gemstone or other grinders with a 5/16" shaft size.
Available in Standard grit, Fine grit or Speed (heavy grit).
The standard grit grinder head is used most often. The
Fine Grit heads provide a much smoother edge, but grinds much
slower. The Speed Bit heads grind nearly twice as fast
as standard heads but leave a somewhat rougher edge. Other
specialty heads are also available below.
|
---
Item --- |
Price |
Qty / Order? |
|
Standard Grinder
Heads (approx 120 grit): |
|
|
|
TL-310 1/4" Standard
Grinder Head |
19.95 |
|
|
TL-311 3/4" Standard
Grinder Head |
20.95 |
|
|
TL-312 1" Standard
Grinder Head |
24.95 |
|
|
Fine Grit Grinder
Heads (approx 220 grit): |
|
|
|
TL-343 1/4" Fine Grit
Grinder Head |
25.95 |
|
|
TL-344 3/4" Fine Grit
Grinder Head |
26.95 |
|
|
TL-345 1" Fine
Grit Grinder Head |
29.95 |
|
|
Speed Grinder Heads
(approx 60 grit): |
|
|
|
TL-320 1/4" Speed Grinder
Head |
25.95 |
|
|
TL-321 3/4" Speed Grinder
Head |
26.95 |
|
|
TL-322 1" Speed
Grinder Head |
29.95 |
|
Also
See Specialty Heads Below
|
|
|
.
Return to top
of page
|
|
Lamp
Bit
Ripple
Bit
Jewelry
Bit
5"
TwinSpin Disc
|
Inland Specialty Grinder
Heads
The Lamp Bit grinder head has 9 degree
and 18 degree angled sides, which allows you to grind the edge
of lamp panels to fit properly.
The Ripple Bit grinder head is used
to reduce the thickness of the edge of specialty glass to the
standard 1/8" thickness.
Jewelry Bits have a very thin grinding
surface designed for creating a slot in fused glass, stones or
jewels for making jewelry. The 1.4mm Jewelry Bit is designed
to create a slot to fit 16 or 18 guage wire, and the 1.0mm will
create a slot for 20 or 22 guage wire.
Replacement 5" discs in three
different grits are also available for the Inland Twin Spin glass
grinder.
Inland stained glass diamond grinder
heads fit all Inland grinders and can be used as replacements
on Glastar (except Starlet/G5), Gemstone or other grinders with
a 5/16" shaft size. Regular grinder heads are also
available, above.
|
---
Item --- |
Price |
Qty / Order? |
|
TL-346 3/4" Lamp Bit
Grinder Head |
32.95 |
|
TL-347 3/4" Ripple Bit
Grinder Head
|
32.95 |
|
|
TL-223 1" Jewelry Grinder
Head - 1.0mm |
28.95 |
|
|
TL-222 1" Jewelry
Grinder Head - 1.4mm |
28.95 |
|
|
|
|
TL-314 5" Disc for Inland
TwinSpin, Std
(standard grit, approx 120 grit)
Out-of-Stock No
Backorders |
67.75 |
|
|
|
|
.
Return to top
of page
|
|
Grinder Upper Work Surface
Simplifies Use of 1/4"
Grinder Heads
"Second Story" work surface
for Inland grinders allows better control when working with 1/4"
grinder heads. The upper work surface raises grinder surface
to level of bit.
TL-316 Inland Upper Work
Surface .................................... 24.95
|
|
|
.
Return to top
of page
|
|
 |
Inland Replacement Work
Surface
For
Inland WizCG, Aero or Impulse grinders
Replacement top work surface for Inland
WizCG, Aero or Impulse grinders. A 3/4" 'Bit Sert'
is also included with the work surface.
Note:
Will not work on the older style "Pop Top" models.
Out of Stock - No Backorders
TL-381 Inland Replacement
Work Surface .......................... 21.79
|
|
Go
to top of Page
|
Twin Spin
Model Grinder
|
Disc Conversion Kit
Converts Impulse or Wizard IV Grinders
Into Combination Router/Disc Grinder
Conversion kit changes the Impulse
or Wizard IV router style grinder into a combination router/disc
grinder with the addition of the Twin Spin dual-level work surface,
5" diamond disc, 22/30/45/90 degree mitre bars and coolant
drip system. The conversion kit results in a complete Twin
Spin grinder with all the power, accessories and options of the
factory Twin Spin model. See also: Twin
Spin Grinder <Click Here>
TL-306 Disc Conversion Kit (Impulse
or Wizard IV) ................. 74.75
Out of Stock - No Backorders
Add
to Shopping Cart?, Quantity:
|
|
Go
to top of Page
|
 |
Motor Shaft Lubricant
Most diamond grinder manufacturers
recommend using a motor shaft lubricant to coat the motor shaft.
If a lubricant is not used, the metal diamond grinding head can
sometimes become stuck on the motor shaft and it may be difficult
to remove.
The manufacturer's motor shaft
lubricant generally comes in a very small tube - usually about
1/10 oz and sells for about $3.50 per tube. We do not carry
the expensive lubricant. We recommend merely applying a
light coating of any common oil base lubricant to the shaft.
We have found that Petroleum Jelly, WD-40, or machine oil works
very well.
|
|
|
© |
Copyright AmeriGlas
Crafts 1997-2021
All content of this web site, including pictures, images, graphics,
scripts, layout designs, wording content and organization, are
the exclusive registered property of AmeriGlas Crafts. See Copyright Information |
Site
Index
| Contact
Us |
Privacy
. |
|
|
|
|