AmeriGlas
Crafts |
-Please Make a
Selection or Scroll Down -
Taurus 2 Ring Saw

|
Powerful Professional
Ring Saw Ridged non-flex ring blade provides more control
than any bandsaw, cuts in any direction and grinds as it cuts. |
|
Taurus 3 Ring Saw

|
Improved Professional
Ring Saw Improved low-maintenance drive system, convertible
to hand-held saw, larger work surface, face shield and built-in
light |
|
Taurus 2 Ring Saw, Taurus 3 Ring Saw, parts and
accessories
|
|
Go to top of Page
Return to Previous Section
|
|
NEW!

 Click
for Large Pictures
On-Line Special!
 Saw is removable from case for
hand scroll work.

 Click
for Large Pictures
On-Line Special!
|
Taurus 3 Ring
Saw Professional Diamond Ring Saw
Brand New Saws
in Factory Sealed Boxes!
- Cuts All
Types of Glass and Stained Glass
- Cuts Ceramic
Tile, Plastic, & Stone
- Ring Blade
Cuts in All Directions
- Ridged Blade
Has Outstanding Control
- Grinds as
it Cuts - No Sharp Edges
- Blades Last
Longer than Bandsaws
Other
Special Features
- Improved
Drive System - Low Maintenance
- Hand-Held
Option for Hand Scroll Work
- Large 18"
x 12" Work Surface
- Blade Stabilizer
for exacting control
- Built-In
Light Illuminates Cutting Surface
- Build-In
Face Shield for Added Safety
- Uses Same
5-/4" Ring Blades as Taurus 2
- Includes
DVD Instruction & Usage Video
- Optional
Heavy-Duty 'Mega Blade' Designed
for Thick Plate Glass, Tile and Stone
|
The Taurus 3 is a professional
level ring saw at a price everyone can afford. The unique
5-3/4" ring saw blade has diamonds on all sides (not just
on the front) so the blade cuts in any direction. Plus
the seamless stainless steel ring blade is ridged and doesn't
'flex' or 'float' like bandsaw blades - that means you get very
accurate cuts. Powerful 1/5 horse power motor. The
Taurus 3 Ring Saw has a convenient snap-open side housing for
easy access to blade, belt and motor. Large 18" x
12" work surface is easily removed for cleaning. Includes
standard 5-3/4" diamond blade and DVD usage instruction
video.
The Taurus 3 Ring Saw has a new
hand-held feature, that allows you to remove saw from the saw
case for hand scroll work. Improved heavy-duty drive system
provides reduced maintenance. Saw has an oversized 18"
x 12" work surface, flip-up face shield and built-in lighting
system. The Taurus 3 saw comes with a standard ring blade
mounted on the saw. An optional 'Mega Blade' exclusively
for the Taurus 3, is super heavy-duty - designed specifically
for thick plate glass, tile and stone. An optional Snap-Apart
blade is also available for inserting blade into a drilled hole,
to allow cutting without side entry cuts.
These
Taurus 3 Ring Saws are brand new in factory sealed boxes. They are NOT referbished or re-manufactured. Our high volumes allow us to give our customers a
great price!
If
you've never used a ring saw - prepare to be amazed!
|
|
Case Size: 18" wide x 16" deep |
|
|
|
Table Size: 18" wide x 12" deep |
|
|
|
Weight: 14 lbs. |
|
|
|
Motor: 1/5 hp, 115 vac, single speed |
|
|
|
Blade: 5-3/4" seamless stainless steel ring |
|
|
|
Lubrication: Water Pick-up, 6 liter reservoir |
|
|
|
Throat Depth: 5-1/2" Throat
Height: 1-1/2" |
|
|
|
Upper Blade Guide Height: 1-1/2" |
|
|
|
Warranty: Three Years (excl. blade) |
|
SAVE -
Mfgr reg price $525.00 On-Line Special $329.75!
$AVE Over 35%
TL-450 Taurus 3
Diamond Ring Saw ......................................... 329.75 Brand
New Saws, In Stock & Ready To Ship!
Add
to Shopping Cart? Quantity:
Taurus
3 Accessories - Scroll Down
|
|
|
|
|
|
Go to
top of Page
Return to Previous
Section
|
|


|
Taurus 3 Accessory Kit
Accessory Kit for the Taurus
3 Ring Saw adds increased versatility to the powerful saw.
The kit includes the same items as the Taurus II Accessory Kit,
except for the face shield and spot light, which were incorporated
into the basic case design on the Taurus 3 saw.
Kit includes, straight-edge guide,
10 degree and 45 degree miter guides (for lamp edges and box
corners), 30-60-90 degree cut-off triangle guides, and circle
guide (up to 15-3/4" diameter circles). An instruction
video is also included covering use of the accessory kit items,
plus it has a section on using the optional "separating
blade". The separating blade is available below in
the blade section.
TL-449 Taurus 3 Accessory
Kit ............................................... 19.95
MORE
Taurus Accessories - Scroll Down
|
|
|
Go to top of Page
Return to Previous Section
|
|

 Separating Ring Blade Allows
inserting blade into drilled hole!
|
Taurus 3 Ring Saw Blades
Taurus 3 ring saw blades are
5-3/4" in diameter seamless diamond coated blades. The
standard blade is .070"/80 grit for use on glass, tile and
stone. All Taurus 3 ring saw blades include replacement
grommets (2 orange grommets in each blade pack) which will normally
last the life of the blade under normal operations.
The separating 'snap-apart' blade
is also .070"/80 grit and allows you to insert the blade
into a drilled hole. This lets you cut a piece out of the
middle of material without having an 'entry-cut' from the edge.
The heavy-duty 'Mega Blade' is
designed specifically for the Taurus 3 saw for improved cutting
of fused glass, thick plate glass, ceramic tile, porcelain tile,
and stone tile. The slightly thicker blade gives londer
life when cutting in today's super-hard porcelan tile and stone
tile.
The Slim "jeweler's"
blade is .050"/80 grit and is designed for very detailed,
fine cutting work. The slim blade thickness of .050"
is about 30% thinner than the standard Taurus ring blades.
The Slim/Fine 'Dichro' blade
is .050"/120 grit is designed for intricate work with less
waste and very fine grit for less chipping. It is intended
for use on dichroic glass, irridescent glass, jewlery, etc.
Note: The Taurus 2 and
Taurus 3 ring saw blades are interchangeable, with two exceptions.
While the Standard, Slim and Snap-apart blades are exactly the
same for both saw models, the replacement grommets included with
the blade pack differ for the Taurus 2 and Taurus 3 style blade
pack. Also, the heavy-duty 'Mega Blade' is only available
for the Taurus 3 model ring saw and will not fit on the Taurus
2 model saw.
Mix any quantity of 3 or more
Taurus blades for lower price. Be sure to use the "Mix"
price buttons. If an incorrect price button is used for
the quantity purchased, the price will be adjusted appropriately
when the order is processed.
Taurus 3 Ring
Blades:
TL-443 Standard
Ring Saw Blade - Taurus 3 .......... each 67.75 / 3+ 64.95 SAVE!
-Regular List Price $89.95
|
|
|
TL-447 Separating,
'snap-apart' Blade - Taurus
3 .... each 67.75 / 3+
64.95 SAVE!
-Regular List Price $89.95
|
|
|
TL-436 Mega Blade
Ring Saw Blade - Taurus 3
...... each 79.75 / 3+
74.95 SAVE!
-Regular List Price $99.95
|
|
|
TL-440 Slim Jeweler's
Blade - Taurus 3 ................. each 67.75 / 3+
64.95 SAVE!
-Regular List Price $89.95
|
|
|
TL-435 Slim/Fine
'Dichro' Blade - Taurus 3 ........... each 79.75 / 3+ 74.95 SAVE!
-Regular List Price $99.95
|
|
|
MORE
Taurus Accessories - Scroll Down
|

|
|
.Go
to top of Page
Return
to Previous Section .. |
|
On-Line Special

 Click
for Large Pictures
On-Line
Special!

 Click for Large Pictures
On-Line Special!
|
Taurus II-2
Ring Saw
Professional Diamond
Ring Saw Sorry - Out of Stock - No Backorders
|
- Cuts All
Types of Glass
- Cuts Ceramic
Tile, Plastic & Stone
- Ring Blade
Cuts in All Directions
- Blades Last
Longer
- Grinds as
it Cuts
|
A professional level ring
saw at a price everyone can afford. The unique 5-3/4"
ring blade has diamonds on all sides (not just on the front)
so the blade cuts in any direction. Plus the seamless stainless
steel ring blade is ridged and doesn't 'flex' like a bandsaw
blades. Powerful 1/5 horse power motor. Saw has convenient
snap-open side housing for easy access to blade, belt and motor.
Large 16" x 10" work surface is easily removed
for cleaning. Includes standard 5-3/4" diamond blade.
If
you've never used a ring saw - prepare to be amazed!
|
Case Size: 18" wide x 10" deep |
|
Table Size: 16" wide x 10" deep |
|
Weight: 12 lbs. |
|
Motor: 1/5 hp, 115 vac, single speed |
|
Blade: 5-3/4" seamless stainless steel
ring |
|
Lubrication: Water Pick-up, 6 liter reservoir |
|
Throat Depth: 5-1/2" |
|
Upper Blade Guide Height: 1-1/4" |
|
Warranty: Two Years (excl. blade) |
SAVE -
Mfgr reg price $400.00 On-Line Special $298.75!
$AVE 25%
TL-420 Taurus II-2 Diamond
Ring Saw ................................. 289.75
|
|
|
|
|
|
Go to
top of Page
Return to Previous
Section
|
|


|
Taurus II Accessory Kit
Accessory Kit for the Taurus
II ring saw adds increased versatility to the powerful saw. Kit
includes face shield, spot light, straight-edge guide, 10 degree
and 45 degree miter guides (for lamp edges and box corners),
30-60-90 degree cut-off triangle guides, and circle guide (up
to 15-3/4" diameter circles). The light and face shied
are also available separately.
TL-429 Taurus II Accessory
Kit .............................................. 49.95
SAVE - Regular $29.95 - Now Only $24.95!
TL-434 Taurus II Light/Face
Shield Set .................................... 24.95
MORE
Taurus Accessories - Scroll Down
|
|
|
.Return
to top of page
Return to Previous
Page
|
|

 Separating Ring Blade Allows
inserting blade into drilled hole!
|
Ring Saw Blades for Taurus
II Saw
Taurus II ring saw blades are
5-3/4" in diameter seamless diamond coated blades. The
standard blade is .070"/80 grit for use on glass, tile and
stone. All Taurus 2 ring saw blades include replacement
grommets (3 yellow & 4 red grommets in each blade pack).
The Slim "jeweler's"
blade is .050"/80 grit is designed for very detailed, fine
cutting work. The slim blade thickness of .050" is
about 30% thinner than the standard Taurus ring blades.
The separating 'snap-apart' blade
allows you to insert the blade into a drilled hole. This
lets you cut a piece out of the middle of material without having
an 'entry-cut' from the edge.
Note:
The Taurus 2 and Taurus 3 ring saw blades are interchangeable,
with two exceptions. The Standard, Slim and Snap-apart
"blades" are exactly the same for both saw models,
however, the replacement grommets included with the blade pack
differ for the Taurus 2 and Taurus 3 style blade pack.
Also, the heavy-duty 'Mega Blade' is only available for, the
Taurus 3 Ring Saw and will only fit on that model saw with it's
heavy-duty drive system.
Mix any quantity of 3 or more
Taurus blades for lower price. Be sure to use the "Mix"
price buttons. If an incorrect price button is used for
the quantity purchased, the price will be adjusted appropriately
when the order is processed.
Taurus 2 Ring
Blades:
TL-421 Standard
Ring Saw Blade - Taurus 2 .......... each 72.75 / 3+ 67.95 SAVE!
-Regular List Price $89.95
|
|
|
TL-430 Slim Jeweler's
Blade - Taurus 2 ................. each 72.75 / 3+
67.95 SAVE!
-Regular List Price $89.95
|
|
|
TL-432 Separating,
'snap-apart' Ring Blade ... each 72.75 / 3+ 67.95 SAVE!
-Regular List Price $89.95
|
|
|
MORE
Taurus Accessories - Scroll Down
|
 |
 |
Copyright AmeriGlas Crafts
1998-2010
All content of this web site, including pictures, images, graphics, scripts, layout
designs, wording content and organization, are the exclusive
registered property of AmeriGlas Crafts. See Copyright
Information |
Site
Index
| Contact
Us |
Privacy . |
|